External Usb Hard Drive For Mac

• Portable External Usb Hard Drive For Macbook Pro
• External Usb Hard Drive For Mac Reviews

In this case, an external hard drive is less expensive and beneficial for storage requirements. You can switch your external hard drive from a Mac to a pc which makes data transfer for two different OS easier. Furthermore, external hard disks are less likely to get corrupted and are portable in nature. The Seagate Backup Plus Slim 2TB is one of the more compact non-SSD drives, making it the best external hard drive for those who are looking to save some space. And at less than $60, it's also a.

Most of the time, when you connect an external hard drive to your Mac's USB port, you soon see it mount on the desktop. Apple likes to ensure these are easy to find, so they also appear in the Finder in the left-hand column under Devices, since Mac's treat them the same way as another computer.

However, sometimes, an external hard drive doesn't show up. It's annoying, especially when you need to transfer something right then. And besides, there can be a risk that data on the external USB pen, hard, or flash drive is corrupt, which means you can't transfer what you need between devices at all.

Corrupt data can be one reason your Mac won't recognize an external drive, but there are other reasons too. Let's take a look why this is happening and how you can get an external drive to appear on your Mac and get recover data to access to your documents.

How to fix an external disk drive that won't show up on a Mac

Why an external disk drive is not showing up? There could be a few reasons why a USB flash drive isn't making an appearance.

Open an External Drive Not Showing on Mac

Get a huge set of top utilities for troubleshooting external hard drives not mounting on a Mac

Start with the basics:

1. Check whether the drive is properly plugged in. It sounds obvious, but since this relies on a wire - either a USB cable or HDMI cable - if it's not connected properly then it won't appear on your desktop.
2. Faulty cable. Assuming it's plugged in correctly, not wobbly or loose, the cable could be at fault. Try connecting the same device with a different cable.
3. Damaged USB or flash drive port. It could be a hardware issue with the Mac. If you've got another port, try connecting the device to that one.
4. Reboot your Mac. Sometimes, if a USB disk won't boot, the cause is macOS issue. Hopefully, some data damage that can be fixed by restarting. Choose the Apple menu > Restart. Or press and hold the power button and, when a dialog box appears, click the Restart or press R. Restarting your Mac essentially clears your macOS's memory and starts it up fresh.
5. Incorrectly formatted drive. Not every external drive is optimized for Macs. It could be that you are trying to connect something only fit to interact with Windows devices. If you've got a PC or laptop, it's worth connecting and seeing if you can access the files through another device. The best way to look for an incorrectly formatted drive is to go to
   Apple (in the top toolbar menu) > About This Mac > Storage.
   See if the external drive shows up here. For more information, go to the same menu option, then select System Report.
6. Mac not formatted to display external drives on the desktop. It could be that your Mac already recognizes the device, but just isn't showing its icon on the desktop screen. Even if that is the case, the drive will still appear in the left-hand column of the Finder menu under Devices. You should be able to access your drive that way, and, in the Finder menu under Preferences > General, you can check External Drives to ensure that from now on it shows up on your desktop too.
7. Reset NVRAM. To do this, shut down or restart your Mac, switch it back on and immediately press these four keys together for at least 20 seconds: Option, Command, P, and R. It should look as though your Mac has started again; if it has, release the keys when you hear the second startup chime. Hopefully, the hard drive has shown up now.
8. Check Apple's Disk Utility to see if an external drive is showing up. Disk Utility is within System Preferences, or you can find it using Spotlight. If it is visible, then click the option to Mount, which should make it visible on the desktop and in the External Drives option in the Finder menu.

Unfortunately, if none of those options has worked and the external drive still isn't visible, then it could have crashed, or be well and truly broken. But there might still be a way you can recover the data on the external drive.

How to show connected devices in Finder

1. Go to the Finder menu and select Preferences (Cmd+comma).
2. From General tab tick External disks to ensure that from now on it shows on the desktop.

In the Sidebar tab you can choose which folders and devices will be shown in the left-hand column of the Finder window.

How to add cloud storages to Finder

You can also mount cloud storage as local drive on your Mac. By connecting Google Drive, Dropbox, or Amazon to your computer, you get more space for securely accessing and sharing files. For your ease, add cloud drives to Finder with CloudMounter app, so that you keep them close at hand. You can read detailed instructions on managing cloud storage as local drives here.

Repair the failed external drives with First Aid

If your drive is having problems, you can try to fix them yourself with First Aid and therefore get access to your files. First Aid tool will check the disk for errors and then attempt a repair as needed. It helps to verify and repair a range of issues related to startup HD and external drive problems. If you are able to fix the hard drive or SSD in your Mac (or an external drive) using Disk Utility you will hopefully be able to recover your files.

To run Fist Aid on an external hard drive:

1. Open Disk Utility. You can searching for it using Spotlight Search or via Finder > Application > Utility
2. Check on your external hard drive, click the First Aid tab and select Run to start running diagnostics.

If First Aid successful in fixing errors, the external drive should be available to mount. If the utility unable to repair issues, your drive truly is broken or formatted using a file system that the Mac cannot read - in this way we suggest you follow the next steps to recover data from a damaged disk drive.

How to recover data from a crashed drive

Thankfully, there is an app for that. Disk Drill is the world's premier data recovery software for Mac OS X. Powerful enough to retrieve long-lost, mistakenly deleted files from Macs, external hard drives and USB drives and camera cards.

Get a file recovery app

With Setapp you get a pack of professional tools for file recovery and Mac maintenance.

An easy way to recover lost files on an external hard drive

Providing you already have Disk Drill Pro version, which you can get automatically by downloading from Setapp:

1. Connect your drive to the Mac.
2. Quit all other applications on the Mac, especially those that may be trying to access the external drive (e.g. iPhoto, Words)
3. Launch Disk Drill.
4. Click on the external drive that you are trying to recover files from. If it has partitions, you will see all of them. If, however, you still don't see any volume to the external drive then you may need to try some of the steps above again or read the Disk Drill Scanning FAQs.
5. To avoid the external drive being accessed during the recovery process, click Extras next to the drive or drive partition or file, then select Remount Volume As Read Only. A padlock will appear, protecting the drive during the process.
6. Now click Rebuild (or Recover) next to the file(s) you are trying to recover. Once the scan is finished - it may take some time if the files are large - a list of files will appeal.
7. Next, click Mount Found Items as Disk button on the bottom-left below the scan results.
8. Disk Drill 'strongly suggest saving the files to a different drive than the one you are trying to recover files from. Saving to the same drive substantially lowers your chances of recovery.'
9. A drive icon will appear, which once you double click will give you the option to open the files as you would do before they were lost. Drag them to another location, such as your desktop or a folder on your Mac.
10. Open the files to ensure they have been recovered properly and safely eject the external drive.

Disk Drill does have other ways to recover lost files but assuming there aren't complications, this method is the most effective. Disk Drill Pro recovery app is available from Setapp, along with dozens of Mac apps that will make your life easier. Never have to worry about a crashed or corrupted external drive again.

A few more tips on getting your files back

1. Macs and third-party apps that look after Macs, such as Disk Drill and iStat Menus come with a S.M.A.R.T. (also known as Self-Monitoring, Analysis and Reporting Technology) status monitor. If a SMART check reports errors, then it could mean the hard drive is at risk of failing completely. Within Disk Utility and Disk Drill, there are several solutions for this: Repair Disk Permissions and Repair Disk. If neither work, it's recommended that you backup all of the data from the disk, erase, then run a SMART check again. The external hard drive should show up as Verified.
2. Partitions can get lost within hard drives, temporarily hiding all of the information contained within. Disk Drill can help to identify and restore this information.
3. Within Disk Drill, you can restore data when a hard drive is damaged or add formatting, which is also something Disk Utility can help with.
4. CleanMyMac, another useful app available from Setapp, can help you identify external hard drive errors and repair them. It is an essential tool worth trying when you're having external hard drive difficulties.

Try all these apps for free

Get a huge set of top apps for keeping your Mac in shape. Best utilities in one pack, give it a go!

Alternative ways to recover data from an external hard drive

Reset the System Management Controller (SMC) if your Mac shuts down when you plug in an external hard drive. Then use a different port to connect the external hard drive. If you've got a battery that you can't remove:

• Shut down and unplug the power adapter
• Press Shift-Control-Option and the power button at the same time. Do this for 10 seconds
• Release all keys
• Plug the power adapter back in and switch your Mac back on

For Macs with removable batteries, you need to switch them off, remove the battery, then press and hold the power button for 5 seconds. After that, put the battery back in, plug in the power adapter and switch the power on again.

What's your file format? One reason your Mac isn't recognizing the hard drive is the file format. Windows uses NTFS file formats, while Macs, up until the introduction of Sierra, have used HFS+. Now, Apple has introduced the Apple File System (APFS) for newer operating systems. It is possible to format a hard drive so it can be read on Mac and Windows computers, providing you format using exFAT. However, if you're having problems accessing the files and the issue is due to formatting, you will need to connect it to a device it can be read on, and then format the files correctly for the computer you are going to use it on next.

How to make Ext2/Ext3 drives readable on Mac

The common issue is Ext2- and Ext3-formatted drives are not readable on macOS. There are two ways to access such external drives on your Mac – via Linux OS or FUSE system. The easiest would be installing Linux to a secondary drive or virtual machine.

If you go with Linux installation, dual boot your Mac with Linux on another drive and use FAT32 as a transfer intermediary. If you don't have a drive to install Linux to, use virtual machine as an interface for it. Transferring can be done the same way – with FAT32, or via network.

Another option for reading Ext2/Ext3 disks is mounting disk with Filesystem in Userspace (FUSE). Basically, it works as an extra interface enabling file system access via specially installed modules. Here's how to mount drives with FUSE:

1. Install FUSE for macOS or MacFUSE as well as fuse-ext2 module.
2. Use the following Terminal command to enable Disk Utility's debug menu and see all partitions: defaults write com.apple.DiskUtility DUDebugMenuEnabled 1
3. Attach your Ext2/Ext3 drive and locate the device name via Disk Utility.
4. In your user account, create a folder to be used as a mount point.
5. Use the following Terminal command to mount the drive as read-only: fuse-ext2 /dev/disk2s2 /Volumes/mountpoint
6. For write support, use the command: fuse-ext2 -o force /dev/disk2s2 /Volumes/mountpoint

https://rustnelcacock1979.mystrikingly.com/blog/mov-converter-pro-6-5-15-download-free. And that's not the only case where Terminal helps you access external drive.

Employ the handy all-powerful Terminal, which always comes forward with solutions for difficult problems. Especially if System Information does recognize the USB or hard drive, but continues to hide it from you, disconnect the drive and try to find it using the Terminal, which you can find in Applications > Utilities.

• Once in the Terminal, type in the command diskutil list
• A list with information about volumes and drives should appear
• Look for a section labelled /dev/disk_ (external, physical)
• Make a note of the whole line after the word disk
• Now put the following command into the Terminal diskutil info disk followed by the number or digits assigned to that disk
• Now you should see detailed information about the drive, therefore confirming that your Mac can and does recognize it
• Eject using the Terminal by entering the command diskutil eject disk followed by the number or digits assigned to that disk
• Physically remove the disk from you Mac
• Plug it back in and your Mac should recognize it

Console is also reliable when it comes to solving tricky problems, although it isn't always that easy to use. You can find Console under Applications > Utilities > Console. Console shows if an external drive or any error is detected under the Errors and Faults tab. If no errors show up, then the problem is not caused by the device.

To sum up, there are lots of potential solutions for a Mac not reading an external hard drive. If we were to pick one, Disk Drill seems to be the most well-rounded, offering plenty of customizations and power in an easy-to-use interface. Disk Drill Pro recovery app is available via Setapp, along with 150+ Mac apps that strive to make your life much much easier. At the very least, you'll never have to worry about a crashed or corrupted external drive ever again.

Meantime, prepare for all the awesome things you can do with Setapp.

Rider 2019 2020 academic calendar. Sign Up

Meantime, prepare for all the awesome things you can do with Setapp.

Rider 2019 2020 academic calendar. Sign Up

Nov 16, 2020 • Filed to: Solve Mac Problems • Proven solutions Download all sims 4 expansion packs free mac.

Most of the people in the world prefer using a Windows PC. And the Windows system uses a different file system which is known as Fat32. Usually, the Fat32 drive can be read and written by macOS, but it is not considered optimal. Even if you try to format the Fat32 drive on Mac, you might end up causing more issues. So, if you have got your hands on a drive which is formatted as Fat32 of any other format instead of Mac OS Extended or APFS, then you should go through this article.

Here, we are going to learn the procedure to format a USB drive and an external hard drive on Mac. Even if you want to reformat the drive on Mac, we have all the answers for you.

Part 1. Overview of Formatting Drive on Mac

Formatting isn't just a process of erasing the existing data on a drive. It is done as a routine maintenance task. But if you want to ensure that the drive has a complete Mac compatibility, then you'll have to format the drive using the Mac OS Extended filesystem. It is possible to read and write on a drive that has a different file system. But unless you format the drive on Mac, it can't be used as a bootable disk or with Time Machine.

Unless you intend to use the drive for file exchange between Windows and Mac, the formatting would be the right thing to do. Here are some other factors that will conclude that formatting the external drive with Mac is necessary as it will also improve the performance of the drive.

• To remove the data from a USB drive or any other drive completely. Simply erasing the data leaves a binary print on the drive. But formatting will erase the binary data too.
• To change the Operating system. Using another OS-compatible drive can make your OS vulnerable to viruses, malware, and other malfunctions. Thus, formatting the drive and deleting the previous system files and settings is vital.
• To improve the performance of the drive, frequent formatting is essential.
• To remove all kinds of viruses and malware, formatting works more effectively than deleting the files.

Thus, formatting the USB drive or external hard drive will get rid of any software conflict that you are facing and even glitches will disappear.

Part 2. How to Format a Hard Drive on Mac?

Now you can understand that there are several benefits of formatting a drive. Technically, when you want to switch a USB or hard drive system to another OS, it is termed as reformatting. It allows the users to reinstall OS and all other software once the format is complete. It is considered as a better process as it is comparatively easy to format the drive for Mac instead of removing files which are malfunctioning. So, from here on, reformat will be considered as a format.

So, here is the process by which you can format hard drive or USB for Mac. The same procedure is followed for all other storage devices too.

1. Connect the hard drive or USB with Mac and open Disk Utility from Applications.
2. Locate the drive from the left side panel of Disk Utility and open it.
3. Now switch to the Erase tab and click on the Format drag-down menu. Choose the Mac OS Extended (Journaled) option.
4. Change the name of the drive if you want to and finally tap on the Erase option at the bottom of the interface.

Portable External Usb Hard Drive For Macbook Pro

A popup window will appear and ask you to confirm the action. As you press the Erase button, everything on the drive will be deleted completely. If you are formatting a small flash drive or USB drive, the process will complete quickly. But if you are formatting a big size hard drive, then the process might take longer than you expect. And make sure that you don't close the Disk Utility before the process finishes.

Part 3. The Best Format Choice of External Drive on Mac

Using the external drive on Mac is a good idea as it provides additional storage. But it is hard to pick a suitable format as it depends on your usage. So, it is better that you know your options and understands which format is right for you. So, here are the best formats for an external hard drive for Mac. You can choose from a variety of file systems.

1. Apple File System (APFS):

All new Macs come pre-installed with this file system. It is optimal for use if you prefer using a Solid State Drive or flash drive. But it is also compatible with the mechanical hard disk drives too. If you don't want to use the drive with Windows OS, then you can pick this format.

• Fast copy and paste
• Better organization of data
• Improved metadata handling and focus on the encryption

2. Mac OS Extended (HFS+):

This format means a Hierarchical File System plus. This was the main file format for macOS before APFS was released. You can reformat USB on Mac to this format easily. This format is suitable for both mechanical and SSD. This format can't be accessed by Windows and if you want to do that, you'll need an additional program.

3. exFAT (Extended File Allocation Table):

This format is designed to overcome the limitation of format fat32 on Mac. By using this format, you can easily share the content between Mac and Windows.

• Read and write feature compatible with Mac and Windows OS
• Ideal for flash storage and External drives.

4. MS-DOS (FAT):

It is the FAT32 format on Mac and it is labeled as MS-DOS (FAT). This format is only ideal for old computers. If you need to transfer the files from an old computer, then you can switch to this format. Otherwise, you'll have to deal with its limitation. It is only good for Windows XP, so, you better avoid it for Mac.

Traktor pro 2 7 1 download free. As you can see, using the APFS or HFS+ format for Mac is ideal to avoid complications with your data files.

Part 4. How to Format USB to FAT32 on Mac?

process, make sure that you have made a backup, or extracted the files of the drive.

Method 1. With Disk Utility:

1. Connect the USB drive to Mac and launch Disk Utility from Application. On the left side panel, you will see the USB drive name.
2. Click on the USB name and switch to the Erase Tab. There, you will see the Format option where you have to select the MS-DOS (FAT) format and Master Boot Record scheme.

Finally click on the Erase button and the USB drive format will complete.

Method 2. Using Mac Command Line:

1. Connect the USB drive to Mac and press CMD + Space key to run Spotlight. Type Terminal in the search bar and hit Enter.
2. When the Terminal window opens up, type diskutil list and you'll find out which is your USB drive.
3. Type the command sudo diskutil eraseDisk FAT32 MBRFormat /dev/disk2 where
   • Sudo is the user right
   • diskutil call the disk utility program
   • EraseDisk command is to format
   • FAT32 set the file system
   • MBRFormat commands the Disk utility to use Master Boot Record to format.
   • /dev/disk2 is the location of your drive.

Wait for the process to finish and type diskutil list again to check whether formatting is done correctly or not. Now, you can use the USB with the FAT32 file system on Mac.

Video Tutorial on How to Format a USB Flash Drive on Mac

External Usb Hard Drive For Mac Reviews

Part 5. How to Recover Formatted Data on Mac?

You will need a strong and reliable data recovery tool for this and Recoverit is the perfect answer. This software is specifically designed so that the users can restore the files that are lost from their system. Recoverit Data Recovery for Mac makes it convenient to get them back. It has a wide array of formats and files support. Plus, you can perform selective recovery along with the deep scan mode which has a 96% success rate.

You can download and install the software from the official website. Once it is installed, you can follow the steps below to recover the lost word files on Mac:

Step 1: Select the Recycle Bin Recovery mode

Launch the software and specify the location on the drive where you want to look for the lost files. In case you don't know the exact location, choose the 'I can find my partition' option and hit the Start button.

Step 2: Scan the Location

The software will scan the Mac drive to look for lost or deleted files. Once the scan is finished, the results will be displayed on the screen. The files will be sorted out according to their formats. Now you can select the files.

Step 3: Preview and Recover

Click on the file to have a preview and make sure that it is not damaged. You can perform multiple selections with this tool. After you've selected all the files, you can tap on the Recover option at the bottom of the screen.

So, you now know what you can do if you ever lost your important files on Mac. However, while you are saving recovered screenshots on Mac, don't save them to the location from where they get lost.

As you can see, it is easy to format USB for Mac and Windows both. As Windows OS is more common, people know a thing or two about it. But Mac OS seems complicated to them. Once you get familiar with the OS, it is not that hard. And if some error arises or anything goes wrong, Recoverit is always here to retrieve your lost data.